Should You Really Remove That Snow

Winter driving isn’t much fun, unless you’re in an empty parking lot whipping donuts out, right? Nobody likes waking up in the morning and getting stuck on the side of the road because your commute is featuring the inch thick ice you were dreading the night before. Winter is a risky time of the year in general, but the risk only gets worse when you’re driving around with a foot of snow on the roof of your car.

Driving with snow piled on top of your car is dangerous for many reasons, the first being it could fall within your line of visibility. Snow melts as your vehicle heats up, but it also could slowly slide down the front of your vehicle, or could abruptly shift and block your sight when driving. This is an issue for obvious reasons. Windshield wipers are great, but they’re made for rain. The best practice is to eliminate the snow from your roof, windows and mirrors before you drive anywhere.

As snow melts and refreezes on the roof of your vehicle, it creates small pieces of ice, that accumulate and become larger hunks. Imagine driving down the highway and having a missile launch from the vehicle in front of you. This can cause cosmetic damage to the vehicle behind you, or could potentially cause an accident to the unsuspecting driver. Even if your ice chunk doesn’t hit another vehicle, it could cause road obstruction which is just as dangerous. We’ve all seen sheets of snow fall off of a semi as they haul their loads down the freeway, so next time you leave, think about clearing off as much as you can to save your fellow commuters.

In the state of Minnesota, it is not illegal to drive with snow piled upon your vehicle. You could, however, be pulled over for driving with an obstructed view. You may also be held liable if for any damage caused by snow falling off of your vehicle onto one behind you, as it violates the Unsecured Load Law in Minnesota. State Patrol advises drivers that if their vehicles are damaged due to ice or snow falling off of a vehicle in front of you to attempt to capture the license plate and contact the police department to seek reparations for the damages. You as a driver should be responsible and remove the snow from your vehicle prior to utilizing your vehicle after a snowfall.

When in doubt, clean that snow off! Nobody wants to be stuck in the cold taking care of this annoying task, but the reality is that you are doing your due diligence as a licensed driver by ensuring you are operating your vehicle safely. Using a soft bristle snow brush should get the job done, and allowing your vehicle to heat up will warm the ice and snow on top of your vehicle, allowing it to slough off with your brush easily. Give yourself the extra five minutes in the morning, save yourself the fine, and potentially save somebody else's life.

It's Not Like The Old Days

Today in auto body, we are faced with more electronics and fluff than ever. Technology advancements have created safer modes of transportation, often edging into luxurious high-tech heaps of steel. This shows no signs of stopping, which has created a huge onslaught of misconceptions when it comes to a “typical bumper job.” There are no typical jobs anymore. Gone are the days of a one day turn around, dropping your car off in the morning for a little repair and picking it up that afternoon is no longer feasible.

Due to the intelligence we are faced with each passing year, we are required to update our repair process. The downside this has for our customers is that the length of repairs for even the smallest jobs has increased. After initial drop off, we need to perform a full disassembly of the vehicle. We remove all parts from the affected area, which often requires us to unplug sensors and other electronics. After the tear down is complete, we can create a complete blueprint of the damage to your vehicle and have a full assessment ready for you or your insurance. This process alone can take hours and is all dependent on the extent of the damage and the complexity of the systems in play.

Once we have your approval to begin repairs, we will assess mechanical requirements of the vehicle. This is when we note any sensors, cameras or other electronics that may require recalibration before being roadworthy. When we’ve established any items required, we get to the meat of the repair, the body work. We get the parts painted, straighten any frame damage and anything else required to get your vehicle back in shape.

When our technicians have completed the repair of parts, and all parts are painted, they reassemble the vehicle. We then put our information gathered during the blueprint for mechanical work to the test. We recalibrate any cameras, sensors, or other systems in the vehicle and scan for any possible code errors. This will tell us if any of the damage to your vehicle is still hiding within the electronic systems of your vehicle, which allows things like your airbags to deploy at the proper time. A step as important as this cannot be overlooked, and we attempt to do it in a quick efficient manner. Sometimes, computers get the best of us, too.

Our last step to a repair is to quality check your vehicle. We have staff check all aspects, things like the paint match, headlights, blinkers and windows are looked over now to ensure they’re in proper working condition. With each vehicle that comes through our doors, we take our time to ensure that all manufactured requirements are met. This means that we are combing over our work, the electric systems, paint match and so much more.


Our goal, as always, is to make sure your vehicle gets returned to you in the condition it was prior to your accident. Sometimes that requires us to take our time and can result in longer than anticipated repair times. We aim to make sure you are safe, and happy. Let us know if you have any questions about the repair process, or any time stipulations you may have, we do our best to accommodate all our customers!

My Insurance Quoted Me Less

In our business there’s a lot of moving factors. It’s not always possible to predict how long the parts will take to get to the shop, when your adjuster can make it out to look at the vehicle, or how much money your insurance company will feel justifies the cost of the repair. Sometimes, your insurance company will write an estimate that’s below the price of the estimate you receive from our shop, or whichever body shop quoted you for repair. This can be alarming, but there’s no reason to worry. 

If you came to our shop and received a quote that was more costly than what your insurance offered, this likely due to a couple of different items. The first, is that your insurance company writes for what they can see. All initial estimates are written without the assumption that there are any damages above and beyond what can be seen by the eye. This is often not a full estimate, as there is likely damage behind what you can see and will require supplements or further billing to your insurance.

The second reason you may have a low estimate, is the type of parts your insurance company wrote your estimate for. Often times insurance companies will write estimates with used or recycled parts to save money. This can be negotiated, within reason. We are lucky to reside in a state that allows you to request your preferred parts be installed on your vehicle, depending on the year. Check your insurance policy and state laws to be sure.

 Another reason your insurance estimate may be lower than you’ve been quoted, is due to the rates that they are hourly paying for repair. In the state of Minnesota, for repairs that are going through insurance we must start at their rates, but we will attempt to supplement your insurance to secure what we require hourly for the repairs. If this doesn’t work, there may be some out of pocket cost to you, but there will always be a conversation before we charge you for anything. 

Occasionally your insurance estimate is less costly than ours could be due to the operations on your estimate. We aim to replace only what needs to be replaced, and to repair parts that are not damaged beyond repair. Often times, your initial estimate is written without the knowledge that parts are damaged beyond possibility of repair. In those cases, to protect and preserve the integrity of your vehicle, we will opt to replace instead of repair.  

Our goal is to repair your vehicle to pre accident condition. This is something we do every day, we have the experience to work with your insurance and take an unwanted stressful experience and turn it into something easy. We aim to do so while also keeping repairs at a cost your insurance agrees to. If you’ve received an estimate that is different than ours in anyway, please bring the estimate into our shop so we can negotiate and find a way to accomplish your repair!

So, You Want To Buy A New Car?

One of the worst parts of our day at Oakdale Collision is having to tell someone their insurance totaled out their vehicle. Purchasing a new car can be a big stressful ordeal. It puts a lot on the line like your credit score, financials, and long-term happiness if you purchase the wrong thing. Sometimes, it’s hard to know what vehicle is the right vehicle, until it’s in front of you. We suggest thinking long and hard about what you need, and what you want out of your next vehicle. 

The financial part is often the most worrisome step towards a new car. If your insurance is totaling out your current vehicle, make sure that you negotiate on your behalf, and that your payout is fair value. Before you set out to test drive your dream car, you need to identify what your budget is, and which type of sale you’d like to do, either private or through a dealership. You will need to identify how much you are willing to spend, and if you are planning on buying outright, or using a loan from either a bank or a dealership. If you go the loan route, decide how much money you are willing to allocate towards a monthly payment.

Paint a picture, albeit a broad one, of your ideal must haves and must nots in the next car you bring home. This can be little things, like auto start or heated seats, to the big items like being AWD or an included tow package. Create a list of your absolutes before you start searching online. This will help you cross potentials off the list, and preemptively thinking about what you absolutely need will allow you to quickly sort through the thousands of cars on the market. Then, once you know the type and trim package you desire, price check it! Look up what the industry norm is, and what people in your area are paying for the same type of vehicle. Keep that at the ready for when you visit the dealer or private party you intend to purchase though.


Absolutely always test drive the car. This is one of the most important parts of the car buying process. You need to know the depth of what you are getting yourself into, and test driving the car will allow you to experience what day to day life is going to be like. You’ll typically be driving the car, but how does the backseat feel? Can you properly use all the mirrors in the car and do you like your visibility? Is there road noise? How is the stereo? Do you feel too close to the steering wheel? Is there enough cargo space? Make sure your salesman has time to spare and take it for a thorough test. Drive on the freeway, find a hill, do a couple brake checks, cruise around and ensure you are positively in love with the vehicle before you entertain the idea of purchasing the vehicle. You also want to have a mechanic on call, for a checkup. It is always a good idea to make sure that the vehicle is mechanically sound.

A new car is an emotional and occasionally expensive venture, but you can save yourself a lot of stress by being proactive and getting your intention set before you start looking. By knowing what you want, you don’t have room for a salesman to upsell you, or to miss a great opportunity by overlooking an older model that has all your absolute must have items. Don’t let anybody push you into anything you aren’t interested in and know that you don’t have to buy anything you don’t love.

Fall/Winter Maintenance For Your Vehicle

 

Winter is fast approaching, and we want everyone to be ready for it. Here at Oakdale Collision, this is our busiest time of the year. As much as we love seeing our customers return, we also aim to make sure that you don’t have to. With every change of season, you should be inspecting your vehicle for required maintenance, and that list can sometimes feel endless. In order to give you a head start here’s our list of things you should be looking into before winter is officially here. 

• Check your tread. Better yet, install winter tires on your vehicle. However, if you have all-season tires, simply make sure that the tread is deep enough. Utilize the penny method; insert a penny headfirst into your tire tread. If you can see all of Lincoln’s head, you need new tires. 
• Test your heat. In Minnesota, this is extremely important. Who wants to walk out to their car the first day of negatives and find their heat is broken?! Do yourself the favor now and turn that heat to the max to make sure it’s working to its best potential.
• Check your brake systems! This is yet another important part of our fall maintenance. Make sure you get a proper idea of how your brakes are functioning, when they may need to be replaced, and that you can stop in a matter of seconds. Winter is full of slick roads and traffic so make sure that your brakes are in their best shape before you’re in a bad situation. 
• How are your headlights? Everybody always talks about rock chips in the paint, and your windshield, but your headlights can also chip. After long use, the headlight covers often get scratched and dingy, giving them a dimmer appearance. This is unsafe in the dark, and even scarier in the winter. There are kits online you can order to improve your line of sight, among many other options we can discuss with you.
• Check all your fluids. Windshield washer fluid will freeze in our temperatures, so make sure you replace the old with one that has a low freeze point. This is also a good time to check your oil and look into your fuel efficiency. Motor oil is also affected by low temperatures and can become thicker and cloggy when cold which affects performance.
• When is the last time you replaced your battery? This one will negate all other maintenance if ignored. Batteries lose power over the course of their lives, and weaker batteries are more likely not to work when the negative temps arrive. Check your connectors, and battery life now to save you the frostbite later. 

There’s a long list of maintenance you should be tending to for your vehicle year-round, but this is our mini-list to help you maintain now. The sooner you get started on your list, the sooner you will find the larger pieces of maintenance lingering. As always, if you ever have any questions about your vehicle, contact us. We are always happy to help!

 

 

Aftermarket or OEM Windshield?

One of the downsides to having a vehicle you love and want to take care of is how often accidents happen. We’re specifically thinking about how often rocks fly up from a vehicle in front of you on the highway and put an unfortunate chip in your windshield. It happens, but what do you do when you either have too many, they’re in your line of sight, or if the whole thing is damaged beyond repair?

Insurance companies occasionally make demands that you may not agree with, but one of the best perks of living in Minnesota is a law that requires the vehicle owner’s explicit approval to replace OEM parts with Aftermarket ones. As an auto body repair facility, we don’t take a stance against or for either OEM or Aftermarket ones, but we will tell you the difference so you can make an informed decision as a consumer.

An Aftermarket windshield has many pros and cons just as an OEM one does. They meet the same requirements that OEM ones do for safety standards dictated by the Department of Transportation. This is often the more cost-effective option when replacing a windshield and are easily attainable. The windshield is a safety-related part, as it structurally supports your vehicle. Due to this, and the fact that aftermarket parts often differ in slight ways, you need to be entirely sure when selecting your glass. A very attentive vehicle owner may notice minimal differences in color, waves and the unfortunate situation of leaking, though this is the exception not a rule.

OEM windshields are identical to the windshield your vehicle came with when it was first manufactured. These windshields have their own list of pros and cons, the largest and possibly only con being the expense. A brand new windshield from your dealership will be much more expensive than an aftermarket option, and may still not be from the same manufacturer as your original piece of glass as most vehicle manufacturers sublet out their glass production.

It is important to be informed before making any decisions involving your vehicle, especially when it comes to a piece as important as the windshield. In the event your insurance company denies an OEM part and you feel strongly about it, most companies can find a way to supply you with the OEM part if you pay the difference in price. We can steer you in the right direction should you need it! If you have any questions about which type of part should be installed on your vehicle, or which company we recommend for windshield install/repair, you can always reach out to one of our employees. We are always here to help!

 

What Is PDR?

Fall is a wonderful time of the year, full of pretty colors, cooler temps, and lots of hail. Hail season lasts into the winter and gets us ready for our busy season. That being said, hail season can often be just as busy as the winter season, but offers an unpredictable flare to the year. When hail storms hit, all kinds of storm chasers come up from the south and set up shop in the cities. Those storm chasers perform a special kind of auto body repair called PDR, or paintless dent repair. Paintless dent repair is exactly as it sounds, these technicians, and some of our own, remove the dents in your vehicle without painting it. Sounds crazy, we know. 

PDR is a lot simpler than you’d imagine. Picture big bright lights, a disassembled vehicle, and little (sometimes large!) rubber mallets. Your PDR technician is actually using pressure from inside the panels of your vehicle to slowly pound them out, reforming the metal to its original shape. The transformation is incredible to watch, and we highly recommend checking YouTube for a severe hail repair! The reason you can perform PDR in hail dents is because the hail pieces leave ridgeless dents in the panels of your vehicle. Dents from things like backing into a pole or getting rear ended aren’t typically candidates for PDR as the paint has been pushed to the point of breaking. However, we can occasionally fix a dent via PDR even if it has a ridge, as long as the paint has not cracked at all! The beauty of having an auto body shop look over your vehicle and repair it is that we can work directly with your insurance on the damage caused by the storm!

We understand though, you may not have full coverage on your vehicle, may not have the time to drop off the vehicle, or you may just want to experiment yourself! There are certain things you can do at home to attempt to repair hail damage. Heat is one way to get the metal panels on your vehicle to flex and return to its preformed shape. By parking your vehicle in the sun, sometimes certain dents can pop out themselves. We’ve heard of people trying hot water methods and using their hair dryers as well. These are all great DIY techniques if you don’t mind some paint discoloration. The other option here would be to chill the dents, some people have been said to use dry ice. They circle the dent with a piece of dry ice, attempting to coax the dent out of the metal. All these techniques have seen varied results, and we do not recommend attempting to repair your vehicle untrained at home, unless you’re not worried about how the vehicle looks afterwards. Attempts to repair the vehicle yourself could result in voiding your warranty, or loss of insurance coverage for the hailstorm. 

Naturally, we suggest bringing your vehicle into your local body shop, which is hopefully ours! There is no way to guarantee that these home remedies will work for your vehicle, and we always have time to help! Whether you’re just coming in for an estimate, or coming in for repairs, we are here to try and solve your problems as best we can. 

In A Collision? What Are Your Rights?

We’ve said it before, and we’ll say it again, we are not your favorite group of people to see. We get it, who likes getting in an auto accident? Nobody comes to Oakdale Collision, throws open the doors and exclaims how excited they are about getting their car repaired. This is an inconvenience to you, your family, and your wallet. We want to make sure that before, during, and after this confusing time you know your rights as a consumer. 

                You have the right to pick where your car is repaired. This one baffles some people, because your insurance sometimes seems to omit this detail. Your insurance company has direct repair facilities it prefers to work with out of ease and contractual agreements holding the shop to certain rates. Occasionally, they will make recommendations to their clients where they should take their vehicles. This by no means requires you to use said body shop, however. You still have the option to get your vehicle repaired at whichever shop you prefer, regardless of where your insurance mentions. 

                You have the right to pick what kind of parts are used on your vehicle. This one can be a bit less clear, but you have a say in what kind of parts are put on your vehicle. There are typically three types of repair parts we could use; OEM, Non-OEM, or recycled parts. An OEM part is an “Original Equipment Manufacturer” part, meaning it was made by the manufacturer. A Non-OEM part is any part considered aftermarket, or made by someone other than the manufacturer, and a recycled part is exactly what the name suggests, recycled. Some insurance companies have you waive this right when you sign their policy statements, but for the most part you have the right to choose which type of part goes on your vehicle. 

                You have the right to a safely repaired vehicle. You can ask us any time about our processes, what we are certified in, and how we fix your vehicle. After the vehicle is finished, we will present you with an itemized copy of everything we did to your car. Our goal is always return your vehicle back to pre-accident condition, and that includes it being a safe vehicle to operate. 

                Our goal at Oakdale Collision is to build a relationship with our customers based on trust, and assurance that we are the very best at what we do. We know it’s true, and hope that one day you can see it too! If you need an estimate, need a repair, or just have some questions about what you should know as a customer, call us today! We’d be happy to help. 

Dangers in Summer Driving

Summer is an exciting time of year. The sun is out, the cabin is open for the season, and hopefully the boat is out on the water. There’s a whole bustle of activity out there, and that’s not always a good thing. Everyone wants to be outside, which means there’s a much larger population of drivers on the road. That being said, it makes sense that summer is the most common time of the year for traffic accidents to occur. 

In the summer, we often see accidents due to construction zones. Especially in Minnesota, which should be renamed the Land of 10,000 Construction Projects, we spend most of our spring and summer avoiding construction. Presently, most of the metro is under construction. Before you take any trips, or have to drive somewhere unfamiliar, look up what construction is between you and your destination, and do your best to avoid it. Torn up concrete and debris can wreak havoc on your vehicle. Expensive havoc.

It’s in our best interests to remain vigilant while driving and pay attention to the road, which brings me to our next biggest cause of accidents; Distracted Driving. Set the right example for your family and keep your phone put away while you’re driving. Pay attention to the road, and make sure that whoever is in the car with you understands how seriously you take the safety of yourself, and theirs. In the world of apps and fancy smartphones, it’s almost inexcusable to be on your phone while driving. Applications now have safety features that include “drive mode” as well as most Apple updates for iPhones. 

Another thing to be conscious of as this summer heats up, is the condition of your tires. Tire blowouts are another one of the most common accidents we see in the summer. As the temperatures rise, bald tires are affected and their chances of blowing out under stress is much higher. This can cause damage to your vehicle, and others if uncareful. 

July and August hold the highest accident rate in our country, August taking the cake. Auto accidents kill more than 40,000 people in the United States a year! It is the leading cause of death in people under the age of 34. Every time you get into your vehicle, you’re risking your life, and the lives of those around you. We hope that you do so in the most informed manner possible. Accidents happen, and we are always here to assist you with any vehicle repairs or questions you may have. 

Does It Really Take That Long?

           It used to be that we drove around in giant metal machines, operating purely on fuel and combustion. Things always change, and in today’s world you’re driving around in a high-tech computer. People still view their vehicles as a machine, but a car hasn’t been “just a machine” for the last fifty years! In 1968 Volkswagen introduced the first computer controlled function in a vehicle; the electronic fuel injector. This advancement in the car industry was huge! The ECU is now a standard seen in all vehicles, emerging in the 1960’s and still used today. By 1986 we had our first auto-driven cars, in 2017 Tesla introduced self driving semi-trucks, and today we’re looking at vehicles that are almost completely self-sufficient.

                This loose timeline is just that, very loose. Imagine all the advancements between the 60’s and today. Now imagine the advancements technicians have seen, working on these vehicles day in and day out. The industry now requires certified technicians, who have undergone training through each manufacturer in order to understand the innermost workings of these computers and the machine themselves. This is all great, because we want our technicians to be the best at what they do. When you put it all together though, what does that mean for you, the customer?
                Time. The biggest thing all these computers have changed during our repair process is time. We no longer have the ability to do one day bumper jobs, because that Audi A6 you drive has three sensors in the front bumper that allow you to feel a little bit safer in your car, but also require us to calibrate them if we remove or have to adjust the bumper. Every vehicle newer than 2008 is equipped with sensors in the passenger seat that signal occupancy and when to deploy airbags in the event of a crash, and has to be reset each time you’re in any minor collision. These sensors are a wonderful safety feature, but in that effort to ensure safety we’re also looking at additional time in a simple repair.

                We do our best to get your vehicles returned to pre-accident condition as soon as we can, but we also want your vehicle to be safe, efficient, and in proper working order before we return the vehicle to you. So when you get frustrated at how long your repairs are taking, consider the type of vehicle you drive, and the computer systems you use each day. The more complicated and high tech your vehicle is, the longer the repairs will take. So, yes, it does take that long, but rest assured that we are doing everything in our power to get your vehicle repaired and back to you safe and sound.

Negotiating A Total Loss With Insurance

We can’t always help what situations we end up in, no matter how hard we try. Sometimes, we forget to brush our teeth. Sometimes, we get into a car accident and our vehicle isn’t repairable. If your vehicle is one of the unfortunate ones that does total out, there are steps you can take to ensure you’re getting the best settlement possible. When a vehicle totals out, it’s actually declared a total by your insurance company. A body shop like ours can’t deem a vehicle repairable or totaled, it can only do what the insurance company declares. In the state of Minnesota, a vehicle is declared a total loss once it reaches 80% of reparability. Once your vehicle has exhausted 80% of reparability, your insurance will declare it a total loss and will reach out to you to settle. The thing that most people don’t know here, is that this settlement is negotiable.

If your insurance values your vehicle at something lower than you feel is fair, you can challenge them. You have the right to seek your own appraisal of your vehicle, and should do so. This is the best way to know for sure if you’re receiving a fair value. Anything challenged with your insurance will need concrete proof, so make sure you document any and all upgrade receipts or appraisals you receive that could help your case.

Another thing you should know is that your insurance includes licensing fees in your settlement. Think about this for a second. When you go out and purchase a new vehicle, you have to pay to license it. So, if your vehicle is worth $5,000, and they give you a check for $5,000, you’re actually being shorted the licensing fees to purchase a replacement vehicle valued at $5000. There are numerous things you should be aware of, but this one is often overlooked by consumers.

Customers of larger insurance carriers like State Farm and Farmers need to be aware of the little things that are wrapped into the total loss of a vehicle. Your insurance carrier doesn’t mean anything personal by this, but they do cut corners to save themselves money. The relationship you have with your agent doesn’t transfer over to the claims department. Their goal is to resolve as many claims and total losses as possible, for the least cost to the insurance. If they save $100 on your claim, and save that same $100 on 100 other claims, they’re saving their employer $1000.

A car accident is a headache for anybody involved. It’s an unpleasant, high stress and oftentimes takes a physical toll. You do your best to keep a good standing relationship with your insurance, take care of your vehicle, and to drive safely, but let’s face it; accidents happen. Sometimes a vehicle is repairable, sometimes it’s not. The moral here you need to take away, as with anything, is to know what your vehicle is worth. If you know the value of your car, you should have no problems negotiating with your insurance.

3M Clear Guard

It wasn’t long ago that protecting your paint job meant installing strange looking vinyl wings to your vehicle, that often left damage from the install. We live in a crazy world and now have the option of putting a sticky clear plastic sheet across the front of our vehicles that will alleviate the rock chips and scratches you would otherwise see in your travels. These clear bras are extremely subtle, and hard to spot unless you’re looking for it. There are numerous different varieties out there, but the clear bra we use at our shop is 3M, which is the best on the market.

Clear film is a great option for vehicle owners that just had their paint done, or are looking to keep a new vehicle looking like new. It’s best installed on high-risk areas of your vehicle, like the front bumper, hood or mirror backs. The films are easy to install, and can be done on site at our shop. They have a multitude of benefits, such as things like yellowing resistance, clarity and self healing technology. 3M originally designed this product to keep helicopter blades running longer, which earned it the nickname of Helicopter tape. However, this product was much heavier and less pliable than what is currently available on the market today. This product isn’t for everyone, or every vehicle. Some people don’t mind the rock chips, or have them already and aren’t interested in repainting their vehicles. Even if you have rock chips, you can get a clear bra installed on your vehicle to protect it from future chips. It does typically run a little expensive depending on where you go to have it done, and how much is being done. We work with our customers to ensure they receive the best value for their money, and can offer advice on what parts of your vehicle could use the clear shield the most.

At Oakdale Collision, we are dedicated to our customers and stand by our products. We want to provide the best experience possible, so if you have questions or would like a quote on clear guard for any portion of your vehicle, give us a call today! 

Cars Aren't For Transportation

The autobody world is in constant fluctuation, due to the upgrades we regularly see in new vehicles on the market. Every year we see newer, more luxurious models of the well known manufacturers. Cars are no longer centered around transportation, they’ve become a mode of entertainment, as intelligent as our smartphones. These advancements are great for the consumer, but from the standpoint of a repair facility, it creates an entire new realm of training requirements, time constraints and overhead costs.

The beauty of this industry is in the endless possibilities. In the next coming years, vehicles will become more and more advanced. Here are five new advancements that will change how we repair cars, soon:

• Augmented Reality Display. This technology is fascinating, and has a bit of a Tron feel. Imagine sitting at the wheel, and having access to the exact distance between you and the guardrail to your right, or the vehicle in front of you. Presently, BMW is working to get this technology into their vehicles, at no one's surprise. This very futuristic tech could be both a handy tool on the road, and as well as an unfortunate distraction.
• Communication Between Vehicles, or vehicle to vehicle communication (V2V for short). You read that right, cars are starting to talk to one another. Cadillac implemented V2V communication i n 2017, which has been said to be similar to inter vehicle wifi. The purpose is to share the intent of the driver with other vehicles, potentially alleviating the possibility of a collision. This technology only works with other vehicles that have the same ability, but it could cut back on quite a few accidents out there.
• 
  
• Self Healing Paint. This technology is already available on the market for various other items, but the jump could be made to vehicles on the market before we know it. Self healing paint is softer than normal paints, and can absorb scratches. You would no longer have those soft scratches in your black paint, and we would see fewer paint jobs.
• 
  
• Solar Panel Powered Vehicles. Imagine how fantastic it would be to have a solar powered vehicle. This is possibly one of the most exciting advancements that may sound too good to be true. You should be comforted to know that Toyota has been researching this technology and its development since 2010.
• 
  
•  Fingerprint Touch Start. Who has actual keys anymore? There’s no specific date when manufacturers decided that keys were no longer “in” but that does seem to be the upward trend. Tesla features a credit card, most vehicles newer than 2010 have push start. Ford received the patent on fingerprint touch start technology in 2015.

With the constant changing environment we’re in, it’s a good thing we’re constantly working to stay up to date on the advancements we may see coming through our doors. There are so many new and exciting things on the market, we can’t wait to see what’s brought our way next! Come see us with any of your vehicle needs, no matter how old school or advanced your ride may be!

What Kind Of Paint?

A new paint job is a delicate beast, and everybody loves a good one. Today’s body shops are seeing a higher intake volume, and their production schedules are filling up fast. Ours is no different. The industry has had to adapt to the fast paced environment we live in, and through that we’ve seen a change in the way we paint our vehicles. Auto body shops simply cannot wait 90 days for paint to dry prior to washing cars anymore, so we’ve seen a vast influx of quicker drying paints on the market to keep repair times down.

                There are numerous different brands and types of paint on the market for auto body. The four most common types of paint used on vehicles are lacquer, urethane, enamel and water-based.  

·         Lacquer: This paint is rarely seen on vehicles these days due to how easily it chips. It was typically found on vehicles made between 1920-1960. This paint is high-gloss and easy to apply, but does not adhere well and will not last as long as desired.

·         Urethane: This paint is highly toxic, but is effective and easy to use creating beautiful paint jobs. It combines the smooth coverage of lacquer and the hard chipfree abilities of enamel to make an effective and beautiful paint. This is a more expensive option, but by far one of the prettiest ones on the market.

·         Enamel: This is a hard bake on paint. It is what is most commonly used in most body shops. The paint lasts much longer than lacquer, and is applied in two coats, a base coat and a top clear coat.

·         Water-based: Our preferred method of painting a vehicle is using water-based paint. It is much better for the environment, and much easier on our technicians. Instead of using solvents to suspend the pigment in the paint, it uses water. This paint is not as strong as enamel, so it typically requires an acrylic clear coat to protect it scratches and UV damage.

One of the most common questions we hear in this business is “how long do I need to wait to wash my vehicle?” Due to the various different types of paint on the market, an easy rule of thumb would be to assume that you do not have lacquer paint on your vehicle, provided it’s newer than 1960. That being said, you can wash your car immediately after driving it off the lot, though it is not recommended. Remember to always wash your vehicle in the shade, and to use soft terry towels and sponges without abrasive edges to ensure that your paint job stays nice and pristine for longer. If you accidentally scrape up your vehicle, remember we’re just a phone call away!

Winter, All Season or Summer Tire?

There are three main categories of tires on the market for your daily driver, all season tires, winter tires, and summer tires. Each type of tire has its own pros and cons, but when compared collectively, the most important thing to consider is the climate you deal with on your day to day. You want to ensure that you’re purchasing the most effective tire for your time, efforts, and for expense! Lets face it, tires are expensive!

Winter tires are the extreme of the three tires, and the best for living in a place like Minnesota. While you will fair alright with all season tires, for a driver inexperienced in heavy snowfall, we highly suggest the purchase of a true winter tire. They feature tread rubber, heavier depth with heavier patterns, and strong edges to cut into the snow.

• Tread Rubber: in all season and summer tires, tread will stiffen in cold temperatures inhibiting the proper traction. Winter tires see tread that is designed to remain flexible regardless of temperature.
• Tread Depth and Patterns: in winter tires, you see a more unique tread pattern or deeper divets in the tread to channel snow and slush, while also expelling water. Summer tires and all season tires have shallow tread and fewer patterns as it’s not an essentially part of driving in warmer weather.
• Biting Edges: Winter tires also have higher sipe densities, which is tiny slits in the tread providing higher traction on ice. 

Typically when you purchase your vehicle and drive it off the lot, they’re outfitted with all season tires. All season tires were designed to provide year-round performance, making them an extremely popular choice. They are versatile and designed to function well on wet roads and in light winter driving. If you’re looking for tires that will allow you to drive year round without any extreme winters or storms, these are the ones you want.

All season tires are the compromise between winter and summer tires, meaning they have to compromise certain attributes. They don’t provide the same grip or handling of a summer tire, or the same ice capabilities of a true winter tire. Just like with your footwear, you’ll want the more extreme of the three based on what the conditions are outside. Nobody wants to wear flip-flops in a snowstorm or snow boots during a heat wave! The choice to purchase an all season tire should be made when you live in a moderate climate, free of extreme cold or ice, and free from extreme heat in the summer. In the event that your tires are ineffective in a storm, and you potentially ding up your vehicle, we’re here to help!

What is a Total Loss?

A common misconception in the autobody world is that the repair shop dictates what happens to your vehicle if it’s past the point of repair. That is false, while we can write estimates for our direct repair companies; it is always up to the insurer whether or not the vehicle will repair. The insurance company you’re working with will determine the salvage value of your car. Of course, there are easy ways to know what you should receive in a pay out if your vehicle totals, but the check itself is paid directly from your insurance, or the insurance that accepted liability of the claim.

The Actual Cash Value is how an insurer will know whether or not your vehicle is repairable. In the state of Minnesota, it operates on an 80% basis, where if the cost of repairs is higher than 80% of the vehicles value, the vehicle will total out. The ACV can be determined by anybody, so if you’re interested you can certainly double check the quote your insurance gives you. That is often recommended as in some instances, the insurance can “lowball” your settlement to avoid paying a heftier bill. They will use information like the condition of your vehicle, the mileage, and commonly things like NADA or Kelly Blue Book. While the year of your vehicle does play a factor, this doesn’t always mean that just because you drive a brand new car, it won’t total out after an estimate is written.

Once the insurer deems your vehicle a total loss, you have the option of buying back the total, or reaching a settlement with the insurance for the total. If you choose to buy the total loss back from your insurance, that will be a settlement between the two of you. This is not always the recommended path, because often the vehicle is not street safe and you could face penalties from the police for driving it. You have the option of working with us to make your vehicle safe, and keep costs down with aftermarket parts.

If you choose to accept that your vehicle is a total loss, the insurance will typically issue you a check for the ACV less any pending deductibles or fees. If you own the vehicle outright, you get the check in full. If there’s a lease or a loan on the car, the check will be issued to the financing company, any overages will be issued to you, but any overages will need to be paid out by you.

Nobody wakes up in the morning and thinks “Oh boy, I hope I wreck my car today!” but sometimes, that’s the reality we face as vehicle owners. Often times, people are fairly out of touch with the repair process. It’s not often to have a “favorite” collision shop, but we’re here to do our best and be the best for you. So, while we may not be your “favorite” stop, we aim to be transparent and helpfull in this difficult time. 

Are Pre & Post Scans Necessary?

Car repair is not a walk in the park for anybody. Clips, moldings, and retainers break. Parts can be delivered damaged or just flat out wrong. There are many variables to every car that comes through our shop, it’s often times hard to predict what all goes into a repair before we’ve fully diagnosed each issue. We do our best to restore your vehicle to pre accident condition any time we see it. As time goes on, the newer vehicles become more and more sophisticated and have updated electrical systems.

If your vehicle is newer than 1996, it has computer systems that can make it difficult to identify underlying issues even for our master technicians. All OEM vehicles newer than 2005 involved in even a minor collision can typically require both a pre-and-post scan, as well as a passenger seat occupancy sensor scan. A vehicle is made up of all kinds of different components, from parts, electronics, and highly sophisticated computers, we do our best to be as well versed as possible in each and every vehicle we see.

Due to the level of intelligence your vehicle is now capable of, sometimes there are underlying issues that can’t be identified simply by looking at a car. You must use a tool to scan the vehicle to try and identify what electrical component is misfiring. Electrical issues that go unresolved can sometimes create serious and dangerous issues with your vehicle. Occasionally, we can run into instances where an insurance company will deny the scans on your vehicle. They’re primarily concerned with the costs associated with doing business with a body shop, not with the safety of you and your vehicle.

A pre-repair diagnostic scan will identify all potential issues that could have been created during an accident, it will identify which systems in your vehicle need to be repaired or calibrated. Any dents, broken glass, battery or electrical issues can flag during a diagnostic scan. The post-repair scan will ensure that all systems are working properly once your vehicle is fully reassembled, and verify that it is safe and ready for you to drive home.

We repair each vehicle to the quality specifications deemed necessary by the OE vendor you purchased your vehicle through. Due to liability reasons, it is often times necessary to scan a vehicle regardless of if your insurance company approves the additional costs or not. If you ever have any questions about the specifications, or if your vehicle has been scanned, feel free to reach out to us about it. We are more than happy to help.

How Do We Know What To Charge

Accidents are never fun, you have to take the time out of your day to get your vehicle to the shop, and play the middle man between your insurance and the body shop. You take the time to bring your car around the city to two separate body shops, and then have to send in two estimates on the damages. So, what happens after you’ve had that additional estimate done?

What most people outside the industry don’t know is that the body shop doesn’t dictate what is done to your vehicle, your insurance does. We create an estimate based on what we believe will be required to repair the car, but that doesn’t mean that the insurance company will pay it. A body shop can give you an estimate on what they know to be damage done during an accident, but they must go off of what your insurance approves for the vehicle. In the state of Minnesota, we are fortunate to be able to approve or decline the use of aftermarket parts, but that’s the extent of control you have over repairs.

Once your vehicle is brought into the shop, the technicians will perform a teardown, and pull all the pieces off of your vehicle to see if there’s any additional hidden damage. This phase is referred to as the blueprinting of the vehicle. It allows the body shop to write a preliminary supplement for the insurance to look over and approve. The insurance has three options. They can have a representative from their company inspect the disassembled vehicle through photos or in person, they can have one of our employees do it for them, or they hire an outside company to approve these supplements. These processes can take weeks, depending on how well established the relationship between the insurance adjuster and the body shop is. 

Your insurance, or the other parties insurance, often dictates the hourly rates, the markup on parts, and the number of hours that can be charged for a certain repair. We have to make sure that we’re getting enough money to do the work, so you can imagine where the back and forth could take additional time while repairing your vehicle. Best case scenario, you find a body shop that’s direct repair with your insurance. State Farm for example has direct repair programs with many body shops across the nation, and this simply means they trust the body shop to write an estimate that meets all of State Farms compliance requirements. This keeps the repair time on the vehicle at a minimum, so you can get your car back quicker than going to a non direct repair facility. 

We are at the mercy of your insurance, and cannot work on a car if they’re not informing us of the work needed to be done. We do our best to keep our customers, employees and insurance companies happy, but we have to work with each insurance to establish a unique repair process for every vehicle that comes through our doors. Keep tabs on your repair, by working with us to get all the necessary information prior to bringing your vehicle into the shop, and remember to keep in contact with your agent to ensure you’re back in your vehicle as soon as possible!